search site for pictures?

[Rob]

Hi Scott. I was wondering if it is possible to search through the forum(s) for all uploaded pictures/diagrams/etc.
I have a picture in my mind's eye of how Bessler's wheel worked that I don't believe I've seen anywhere, and would like to find if someone else has had this idea, or something similar to it.

[rlortie]

Rob,

I am not Scott, but you can view all pictures by clicking on "albums" located at the top of this page. There you can either choose selections either by date or by member.

Start by date (2003) and view at your leisure!

Ralph

[sequeen]

Ralph

Thank you for mention about the method to look before designs.
I have checked all pictures in this forum from 2003.
Luckily there is no same thing to mine.
Today I assembled the main frame.
Tomorrow will be the D-day of my experiment.
I cannot sleep tonight.
Can you explain about the difference between Bessler forum and Arrache forum?
I do not know which is what.

[jim_mich]

Have you looked at The Museum of Unworkable Devices?

PS. Looking through all the devices listed there would keep a person busy for a long time.

[sequeen]

Thank you Jim
I will check.

And I have something to tell you.
There is no BIG hitting inside the wheel.
Hitting is small accident during weight's swing.
Bessler might be mistake in radius calculation of the outer wheel.
Or lever was made by too much flexible material.
And the hitting do not give a big effect to the wheel rotation.
Wheel rotate by the weight's swing, not by hitting.
This story is based on my design.

[Rob]

thanks a lot rlortie and Jim, that will keep me busy for a while. Like sequeen I had joined this forum in 2003 too. Has it been that long already? A couple years ago I thought I gave up the quest for Bessler's secret, but here I am back again. I just ran through some calculations on the principle of my idea this morning, and at best I get a balanced wheel. But Jim, you may be interested to know the values 5, 55, 555, and 5555, appeared, in different places, unexpectedly.

[rlortie]

It was brought to my attention by e-mail from a forum member, that to view all album pictures you must stay logged in. Otherwise all you will get are those posted in General discussion.

I presume that if you stay in the album section you will eventually be logged out which is set for a predetermined time.

Ralph

[jim_mich]

When you log in, click the button to stay logged in. Then write down your password, because it can be months before you need to log in again.

[rlortie]

Jim,

Sorry to be such a computer idiot, but where is this "Stay logged in" button or icon you speak of.

I use "Remember me" so that I do not have to enter my password each time, but that does not stop me from "timing out" over the time of a coffee break or typing a long post with a lot of thought.

Made a habit of' when ready to submit, I right click and " select all" then "copy" before hitting the submit. If I have timed out, I re-log, open a post window and "paste"

Sure would like to know how to stay constantly logged in.

Ralph

[jim_mich]

Yes, its the 'remember me' button.

I've almost never been timed out. And if I do get timed out I never need to log back in again, I simply re-click my link to BesslerWheel, which is:
http://www.besslerwheel.com/forum/searc ... d=newposts

I had to look up my BesslerWheel password in my little password book when I got my new computer, since I had not entered it in many months.

I edit all my long post in notepad. Then go back and click the post reply button, paste the text and hit the submit button.

It's probably they way I use the computer that keeps me from getting timed out.

[murilo]

Thank you Jim
I will check.

And I have something to tell you.
There is no BIG hitting inside the wheel.
Hitting is small accident during weight's swing.
Bessler might be mistake in radius calculation of the outer wheel.
Or lever was made by too much flexible material.
And the hitting do not give a big effect to the wheel rotation.
Wheel rotate by the weight's swing, not by hitting.
This story is based on my design.

I guess that is a great advantage if you have such project/idea and your personal hands-on skills are enough to the building and tests!

This means that you will/should be independent of 'alien brains' and good will! 8(

My skills, for ex., are absolutely minute... kind of curse... 8(

[sequeen]

Mulio
I am not alien. I am normal human.
I started building before yesterday. But I do not have enough money and skill.
Yesterday I found there are too much friction in my building.
I have to prepare better method to build.
Laser cutting could be also one kind of method.
But the cost will be too big to me. I have to find cheap and accuracy method.
I also think to make it small. For example desktop size.
If succeed I will use it for a cordless fan with a propeller on the axle.

[rlortie]

Can you explain about the difference between Bessler forum and Arrache forum?
I do not know which is what.

'Arrache' forum "Gravity Solution Group" is a hidden forum.

By clicking on "Groups" located in the above header at top of page, you will find various sub-forums, usually by moderator name. A hidden forum will not show.

"Gravity Solutions Group" is intend only for associates working in a corporate manner to "skunk Work" client designs. Members are selected on an as needed basis and promise to fulfill the obligations that come with the job. People of various skills in related fields viable for seeing a self-sustained design built, patented and commercialized.

For the better part, some who are affiliated prefer being silent even to those members who have access, this is especially true for investment resources who do not want every Tom, Dick, and Harry bugging them for an "I think I have the answer, but need financial help"...

Currently the forum is quiet, I have been able to analyze and keep up with client submitters, the rate of new entries has decreased these last few months.

Ralph

[sequeen]

Ralph
I have sent three mails to you.
But in my mail program it shows [unread] mark.
Did you receive my mail?

[murilo]

Mulio
I am not alien. I am normal human.
I started building before yesterday. But I do not have enough money and skill.
Yesterday I found there are too much friction in my building.
I have to prepare better method to build.
Laser cutting could be also one kind of method.
But the cost will be too big to me. I have to find cheap and accuracy method.
I also think to make it small. For example desktop size.
If succeed I will use it for a cordless fan with a propeller on the axle.

Sequeen,
please read my message once more... please.
Generally, I'm very friendly... 8)
For sure, we are allied brothers and present at this same adventure boat! 8)
I didn't said you are an alien (stranger or weird guys that just understand what they want to.)
The word 'alien' was sent to other kind of people... not to you.
I said I'm glad for you since you are able to make your own construction.
Since the start I'm wishing to you all the best results. BE SURE!
Best!
M