Over the top
Moderator: scott
-
- Enthusiast
- Posts: 28
- Joined: Sun Jan 15, 2023 5:04 am
Re: Over the top
Hi, Kat
Here is one more page you could try if your group is interested ( it does not matter what they are called, it's what they do that matters )
cfi forums
under -- Pseudoscience and the Paranormal
Everything you need to know on how to build a perpetual motion machine
If you would like to talk with me, you can find my email - Google
Wlazlak John Collins - john and I have talked many times on this subject
Tom
Here is one more page you could try if your group is interested ( it does not matter what they are called, it's what they do that matters )
cfi forums
under -- Pseudoscience and the Paranormal
Everything you need to know on how to build a perpetual motion machine
If you would like to talk with me, you can find my email - Google
Wlazlak John Collins - john and I have talked many times on this subject
Tom
Re: Over the top
I didn't know that Bessler.com had become a straight dating club !!! lol
Not everything I present is functional, but a surprise can't be completely ruled out.Greetings.
Re: Over the top
Tom.
If you know how to build it, why haven't you?
If you know how to build it, why haven't you?
Re: Over the top
I don't know about pendulems but this thread has gone over the topthe rocket sturgeon wrote:The key to success in solving the puzzle of Bessler's Wheel is to get a 360° pendulum to go over the top.
........................¯\_(ツ)_/¯
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
Re: Over the top
When I mentionedAtomitonPhysics wrote: ↑Sat Jan 21, 2023 12:09 am . .. .. .
It turns out that perpetual motion
machines are impossible to make work so Mr. Kelly Said we can change the wording to Free Energy that means the same thing but it is
possible.
. .. ..
Sincerely, Kat aka. AtomitonPhysics
Mr. Kelly changing his mind was first on the list, yet that didn't seem too likely.There could be other options yet these seem the most likely.
I don't like this Mr Kelly guy. He doesn't seem bright enough to be a teacher.
........................¯\_(ツ)_/¯
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
-
- Enthusiast
- Posts: 28
- Joined: Sun Jan 15, 2023 5:04 am
Re: Over the top
tarsier 79
Asked the question if I have working technology why have I not built it?
I have, and showed Senax, A photo of this technology, but somehow he forgot to mention this on this forum
Tarsier 79, All you have to do is email me and I will tell you everything needed to know how to build a working system
I will send you drawings, photos, and you can have a zoom meeting if you like were it can be shown the working motor prototype.
I have done this for others, I am not the only one that has this working technology, any I have talked too have it also.
Tom
Asked the question if I have working technology why have I not built it?
I have, and showed Senax, A photo of this technology, but somehow he forgot to mention this on this forum
Tarsier 79, All you have to do is email me and I will tell you everything needed to know how to build a working system
I will send you drawings, photos, and you can have a zoom meeting if you like were it can be shown the working motor prototype.
I have done this for others, I am not the only one that has this working technology, any I have talked too have it also.
Tom
Re: Over the top
I guess Mr Kelly could be using the assignment to teach them thermodynamics.
Re: Over the top
That is really good news. Retired Engineers are the most wise people you can meet.AtomitonPhysics wrote: ↑Sat Jan 21, 2023 12:09 am Good news, Our science group has found 2 retired Engineers that have working free energy devices. It turns out that perpetual motion
machines are impossible to make work so Mr. Kelly Said we can change the wording to Free Energy that means the same thing but it is
possible.
They are worth their weight in gold.
Regards
[MP] Mobiles that perpetuate - external energy allowed
-
- Enthusiast
- Posts: 28
- Joined: Sun Jan 15, 2023 5:04 am
Re: Over the top
Well: Retried Engineers could be wise not to talk with any people that are very rude.
If I were Kat. I would not talk to anyone that is rude about what they are doing in there classes.
And then again Physics Engineering Class, How many of you good people have taken a Physics Engineering Class in High School?
Wow!
Hummm. I think Mr. Kelly has his act together.
If I were Kat. I would not talk to anyone that is rude about what they are doing in there classes.
And then again Physics Engineering Class, How many of you good people have taken a Physics Engineering Class in High School?
Wow!
Hummm. I think Mr. Kelly has his act together.
Re: Over the top
Tarsier79 wrote: ↑Sat Jan 21, 2023 1:28 am A gravity engine is just as impossible as a permanent magnet motor without an external ...
Really - The amount of energy stored in a permanent magnet is more than any gravity device. There is no comparison.
Anyway hopefully the 2 engineers will say hello here.
[MP] Mobiles that perpetuate - external energy allowed
Re: Over the top
Hi Tom.
Is your prototype the linear one I saw on the forum you mentioned?
https://forum.centerforinquiry.org/t/ev ... rt/9375/20
or is it a motor type setup?
Is your prototype the linear one I saw on the forum you mentioned?
https://forum.centerforinquiry.org/t/ev ... rt/9375/20
or is it a motor type setup?
-
- Enthusiast
- Posts: 28
- Joined: Sun Jan 15, 2023 5:04 am
Re: Over the top
The linear motor is 20 years old and is self starting permanent magnetic force rotation of a total 9 full rotations in the length of its travel
it can be reversed travel turned around and ran any direction on the track showing there is no wind down action
The motor is only 18 inches long but in 12 inch is 1 full turn, so there is no limit to how long it would go miles, at least 20 years or more
The drawing are a magnetic device that allows for the counter reaction to be reduced by 1/50 of the total output of a motor design
There is a third motor that was finished and tested on 12 / 7/ 2022 that is electric type where the coils produce 5 times more than a
normal coil at the same power input the motor runs on 90 watts input and produces over 300 watts output power
Again there is no limit of the power output per design.
Again I will show and tell how all these devices work only to the people that are willing to email me and talk that way, not on a forum
Tom
it can be reversed travel turned around and ran any direction on the track showing there is no wind down action
The motor is only 18 inches long but in 12 inch is 1 full turn, so there is no limit to how long it would go miles, at least 20 years or more
The drawing are a magnetic device that allows for the counter reaction to be reduced by 1/50 of the total output of a motor design
There is a third motor that was finished and tested on 12 / 7/ 2022 that is electric type where the coils produce 5 times more than a
normal coil at the same power input the motor runs on 90 watts input and produces over 300 watts output power
Again there is no limit of the power output per design.
Again I will show and tell how all these devices work only to the people that are willing to email me and talk that way, not on a forum
Tom
Re: Over the top
It's rude to lie to people.Dr.Wlazlak wrote: ↑Sat Jan 21, 2023 10:23 pm Well: Retried Engineers could be wise not to talk with any people that are very rude.
. .. .. .
........................¯\_(ツ)_/¯
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
Re: Over the top
by telling students their grade, & hence their future, depends on them making a perpetual motion machine??!!!
That's crazy.
........................¯\_(ツ)_/¯
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
¯\_(ツ)_/¯ the future is here ¯\_(ツ)_/¯
Advocate of God Almighty, maker of heaven and earth and redeemer of my soul.
Walter Clarkson
© 2023 Walter W. Clarkson, LLC
All rights reserved. Do not even quote me w/o my expressed written consent.
Re: Over the top
Maybe the lesson is PM are impossible.
If the students success in making one, they get a fail grade. Lol
If the students success in making one, they get a fail grade. Lol
I would trade everything to see her again, even a perpetual motion machine…