Does anyone want to know how it works?

A Bessler, gravity, free-energy free-for-all. Registered users can upload files, conduct polls, and more...

Moderator: scott

Post Reply
Dr.Wlazlak
Enthusiast
Enthusiast
Posts: 28
Joined: Sun Jan 15, 2023 5:04 am

Does anyone want to know how it works?

Post by Dr.Wlazlak »

THERE ARE MANY WAYS OF MAKING A DEVICE THAT WORKS ON A COMBINATION OF GRAVITY AND MAGNETIC NON-ENERGY FORCE
You know a perpetual motion machine: but using energy to run on and not running forever. just a long time
The big question is: Why does anyone want to know how this is done?
#1 once you know how it works the search is over to find a working machine device. you will have to go back to watching TV
#2 If you have a working device system thing -- NO one wants to know that you have a working device system thing.

So telling anyone is a waste of time on the person's part that has a working device. So no more Forum life for you

Going on any Forum, webpage, youtube, or any social media will just bring forth anger and resentments
from all medias, To the holder of the knowledge of such working technology. Rude and other bad comments is a given outcome just for asking if any are interested. All medias are the same.

This gives the question: Why does these Energy forums exist? If you have it: you are not wanted any more. to those that don't

So: Does anyone want to know how it works? Not likely. But here you are on a energy forum looking anyway.

A good Post not to ponder on too long.

good date 1/ 21 / 23
User avatar
Tarsier79
Addict
Addict
Posts: 5141
Joined: Fri Mar 12, 2010 2:17 am
Location: Qld, Australia

Re: Does anyone want to know how it works?

Post by Tarsier79 »

Im not sure if it is worth seeing what you have. Your linear motor doesn't reset itself. It doesn't seem like you have built your permanent magnet motor design. Many people have bedini pulse coil designs and claim overunity, but all the ones I have seen, they are mistaken. Electricity is misunderstood by most people.
Dr.Wlazlak
Enthusiast
Enthusiast
Posts: 28
Joined: Sun Jan 15, 2023 5:04 am

Re: Does anyone want to know how it works?

Post by Dr.Wlazlak »

And by all means: Refrain in your own assumptions to withstand and again refrain from the cause and effect to the unknown
whereas to assume without feather investigations to the point of lack and unjust information on your part.
make the following comment
I don't know anything about what you really have on your shelf at home. Only because you don't -- my dear uniformed friend --
lacking in such knowledge brings on a very good example of the whole concept of the topic at hand

Does anyone want to know how it works; The full and total lack there of confirms how it works is on a not to know basis and rightfully so.

Giving in full view of the first comment of this topic -- You Are lacking what it takes to comment on this subject post day one.

End of Story.
User avatar
Tarsier79
Addict
Addict
Posts: 5141
Joined: Fri Mar 12, 2010 2:17 am
Location: Qld, Australia

Re: Does anyone want to know how it works?

Post by Tarsier79 »

Uninformed.

Fact: Your linear device is not perpetual and does not reset itself. Therefor your claim that it is perpetual is uninformed.

Fact: You did not build your own design for a permanent magnet motor. Perhaps you tried and failed, perhaps you just want someone else to build it. Your claim that it works is uninformed.

Now you claim to have a working coil motor. We already have two misinformed claims, but you expect us to beg for your superior knowledge, and wonder why no-one does. Electricity and magnetism likes to conserve energy: That is how a transformer works. That is why a magnet slows through a copper pipe. It is highly unlikely you have anything of substance.

I feel your devices are not replicated like Beddini or Skinner mainly because of your social ineptitude.

If you do have anything worth showing, it is your own fault is has not been commercialised.
Attachments
0f1d9063b0b01cbe6c664d4c6b6791b6f5d6e53f[1].jpeg
d740e2321a871fd912cb77e9b57893d59a7f9386[1].jpeg
User avatar
agor95
Addict
Addict
Posts: 7725
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Dynamics

Post by agor95 »

Over the years we have read posts on the dynamics present within this forum.
Also the dynamics of the subject within the general population.

So members; what do you find that works in this forum?

Do you value the site and what is your motivation to read and post?

Regards
Last edited by agor95 on Sun Jan 22, 2023 10:50 am, edited 1 time in total.
[MP] Mobiles that perpetuate - external energy allowed
Dr.Wlazlak
Enthusiast
Enthusiast
Posts: 28
Joined: Sun Jan 15, 2023 5:04 am

Re: Does anyone want to know how it works?

Post by Dr.Wlazlak »

Does anyone want to know how it works?

As for the linear motor - This was designed as a test motor only as with all my designs. never to do more than being a test device.

If anyone wants to know how to build more than IT, never saying MY IT or it could be. and never being more than a test IT

Please be careful of jumping into IT Without knowing what IT is in the first place. Like some do without being aware of what IT

being Rude by some on this Forum is very much against the Rules of the forum maybe some should re read the rules and abide by them

Or just get kicked off the forum all together as what should happen in most good forums owner do. Thank you.

It ---- Is a YES or NO answer only Question: after all.
Dr.Wlazlak
Enthusiast
Enthusiast
Posts: 28
Joined: Sun Jan 15, 2023 5:04 am

Re: Does anyone want to know how it works?

Post by Dr.Wlazlak »

In fact I do not wish to share any information to anyone from this Forum
and I will not return and will not respond to Emails if send from any on the forum

Thank You. Tom
User avatar
Tarsier79
Addict
Addict
Posts: 5141
Joined: Fri Mar 12, 2010 2:17 am
Location: Qld, Australia

Re: Does anyone want to know how it works?

Post by Tarsier79 »

And the attention seeker is gone.
Sam Peppiatt
Devotee
Devotee
Posts: 1816
Joined: Tue Dec 01, 2015 4:12 pm

Re: Does anyone want to know how it works?

Post by Sam Peppiatt »

Well, he seams to be right about one thing. Nobody wants know how the wheel worked. You would have better luck talking to a fucking post----------------------Sam
User avatar
MrTim
Aficionado
Aficionado
Posts: 924
Joined: Thu Nov 06, 2003 11:05 pm
Location: "Excellent!" Besslerwheel.com's C. Montgomery Burns
Contact:

Re: Does anyone want to know how it works?

Post by MrTim »

Dr.Wlazlak wrote: Sun Jan 22, 2023 11:09 am Does anyone want to know how it works?
Thanks, but no thanks. :-)
I already know the principle of how my device will work, so I don't have any spare time to devote to yours.
But I wish you the best of luck with yours... ;-)
"....the mechanism is so simple that even a wheel may be too small to contain it...."
"Sometimes the harder you look the better it hides." - Dilbert's garbageman
User avatar
agor95
Addict
Addict
Posts: 7725
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: Does anyone want to know how it works?

Post by agor95 »

Sam Peppiatt wrote: Sun Jan 22, 2023 7:21 pm Well, he seams to be right about one thing. Nobody wants know how the wheel worked. You would have better luck talking to a fucking post----------------------Sam
In a way we are;

There are posts here all the time and we talk by typing.

Mind your language
Last edited by agor95 on Mon Jan 23, 2023 10:50 am, edited 1 time in total.
[MP] Mobiles that perpetuate - external energy allowed
Post Reply