Robert...
With all those crosses and Stars of David, it sounds to me like you have a very complex design to your "GPW". I do not think I would have persued a design to that level of complexity because, since I'm out to replicate Bessler original design, I would be prevented from doing so by the "Carpenter's Boy Law".
It sounds to me that you, like I recently have, are slowly reaching the conclusion that using a separate set of shifter weights to shift a set of drive weights is yet another dead end. The two sets of weights just produce a composite CG that eventually takes up permanent residence directly below the axle of the wheel.
ken
It Would Be More Noble To Clear J. Bessler's Name, than trying to solely profit
Moderator: scott
-
ken_behrendt
- Addict
- Posts: 3487
- Joined: Wed Mar 02, 2005 7:45 am
- Location: new jersey, usa
- Contact:
re: It Would Be More Noble To Clear J. Bessler's Name, than
On 7/6/06, I found, in any overbalanced gravity wheel with rotation rate, ω, axle to CG distance d, and CG dip angle φ, the average vertical velocity of its drive weights is downward and given by:
Vaver = -2(√2)πdωcosφ
Vaver = -2(√2)πdωcosφ
-
AgingYoung
- Aficionado
- Posts: 761
- Joined: Sun Apr 03, 2005 4:44 am
- Location: Houston, TX
re: It Would Be More Noble To Clear J. Bessler's Name, than
amen
Working Model 2D
[It is] the glory of God to conceal a thing: but the honour of kings [is] to search out a matter.
[It is] the glory of God to conceal a thing: but the honour of kings [is] to search out a matter.
re: It Would Be More Noble To Clear J. Bessler's Name, than
No, it is simple.
As I was building all others before this design, it soon became obvious, that they weren't going to work.
This one though, becomes more obvious it will work as I get farther along with it.
Still no failure..................
For the Glory of the Lord
Amen
As I was building all others before this design, it soon became obvious, that they weren't going to work.
This one though, becomes more obvious it will work as I get farther along with it.
Still no failure..................
For the Glory of the Lord
Amen
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Yes!
Found some small turnbuckles on google that I'll useto adjust spacings inside the GPW
Still no failure..........
Found some small turnbuckles on google that I'll useto adjust spacings inside the GPW
Still no failure..........
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
"Good news".
Still no obvious failure happening.
Worked more on completion only briefly last night.....
Still no obvious failure happening.
Worked more on completion only briefly last night.....
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Can't wait for mail order turnbuckles. Got some small enough at Home Depot tonight.
Made a cover for the open side of the wheel.
Will know for sure in a couple days, success or failure.
Made a cover for the open side of the wheel.
Will know for sure in a couple days, success or failure.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
The excitement is building! Good Luck!
re: It Would Be More Noble To Clear J. Bessler's Name, than
For the Glory of a Judeo-Christian God.
Amen.
Amen.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
I'm not sure he was joking.
Disclaimer: I reserve the right not to know what I'm talking about and not to mention this possibility in my posts. This disclaimer also applies to sentences I claim are quotes from anybody, including me.
re: It Would Be More Noble To Clear J. Bessler's Name, than
... then let's hope he has a sense of humour :)
re: It Would Be More Noble To Clear J. Bessler's Name, than
I'm dead serious.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
I'm sorry to hear that. Will you reconsider your decision?
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.