Georg's ideas powering the wheel

[Georg Künstler]

Hi Wheeler,
you are right I found the solution also in the piezo gas lightener. Instead of pressing the it, I used a stone, and gravity can press it. The piezo technic is used in my kitchen, it produces sparks forever, only driven with gravity. So the solution is in front of you. It is not Bessler, but a solution for free energy.

Next point:

Have you considered an inverted pendulum to assist the tipping point?,

Yes, the construction you see is only a part of the wheel. The inverted pendulum I had shown a year ago. I generate a swinging, by tipping over, again and again. With 80 dowels I get 80 swings per turn.

Take a wheel with dowels, and roll a wheel inside. The wheel inside will swing.
The swinging is supported by one cylindrical weight in the middle.
Look at video.google.com and there Besslerwheel. Their I showed
the swinging. Look at the swinging, rolling cylinder inside. Study the movement.
To prevent that the cylinder is rolling back and producing negative torque I used the driver and runner construction in the middle. The wheel is always out of balance. It is a one directional wheel.

It is indirectly powered, because the source of the swinging isn't touched.
If you use only the driver, runner construction to power the wheel it will not work, you are right. You need the tipping over wheel inside, to swing.

the future has begun

Georg

[Wheeler]

Your search - video.google.com/Bessler - did not match any documents.

[jonnynet]

Georg, I never realized the cause of the swinging. So the dowels are the parts causing the inner cylinder to swing! Well, that's imaginable but how to prevent the counter torque is a thing I don't understand.

[Georg Künstler]

Hi Jonnynet,

With the driver and runner construction. I putted the driver-runner construction in the middle of the wheel. Now, the rolling cylinder can not swing the complete range, it can only swing back and forth on the working-area.

You have seen the T-pendulum, some mails ago, it forces the rolling cylinder to one side of the wheel. The T-Pendulum has a preload function. A permanent preload function. The rollling cylinder tries to reach the deepest point, but never can reach it.

The complete system is a simple mechanical oscillation system.

the future has begun

Georg

[Georg Künstler]

Hi Wheeler,
try 'Besslerwheel' as I have witten in the mail before.

the future has begun

Georg

[LustInBlack]

Wow.. 12 secs video of a decellerating non working lame attempt of a wheel.

At least, you could have reversed the video, you could have wasted a bit more of my time..


What's your problem really!? ..
You cannot deal with failure or what?!


I have one wheel design for you, fill 1/10 of a bottle of pepsi and roll it on your table! YAHOOOOO Hours of fun for you !..

[Georg Künstler]

Hi LustInBlack,
good seen, a 1/10 of a bottle of pepsi will fullfill a part of the requirements for a free running wheel.

What you havn't detected is that the complete inner wheel is tumbling.
This is achived by rolling over the dowels. The complete inner wheel is a mechanical swinging system. It makes 80 swings per turn.

So when you compare it to your pepsi bottle, you only have to roll it over a stick and watch how the liquid inside will move. It's a very cheap experiment for you. Required for your test is only the bottle maybe half filled and a stick.

the future has begun

Georg

[LustInBlack]

I think you don't grasp that I don't really care..

[ovyyus]

Pepsi won't work - try Coke? :P

[Patrick]

Lustinblack;

You should care about such a concept as spoken by Georg. It is a real possible for adding up the extra energy. Even if taken with the bottle lower half. You can shake and flip ; for example take the toy attach and snap it out. It goes with an added of energy from your hand. Even if you can lick a steel in winter you would be painful.
That is how simple Bessler understanding made his rotogarden.

More and the same!

[LustInBlack]

Yeah sure, it works, but it doesn't..

Where's the working wheel !?

You all think you grasp bessler's hints and that you have the working concept, but you have no proof at all and nothing that turns, even for 5 seconds..


Georg is just another steorn..

Big BLABLA and Big NO result.

[Bessler007]

If you would supply the capital I'd invest ½ of it into the development of this....

Hi Wheeler,
you are right I found the solution also in the piezo gas lightener. Instead of pressing the it, I used a stone, and gravity can press it. The piezo technic is used in my kitchen, it produces sparks forever, only driven with gravity. So the solution is in front of you. It is not Bessler, but a solution for free energy. .....

the future has begun

Georg

[LustInBlack]

And that's supposed to mean ?!

[10x]

If you would supply the capital I'd invest ½ of it into the development of this....

Yep pocketing half is what most folks try to do. LOL

[ovyyus]

Georg leads others to waste much time and money and effort on his self-proclaimed 'solutions'. Never have they been rewarded for their effort, always they are left disappointed. His actions are those of a liar and a cheat.

Georg comes here pretending to have solutions. He uses the forum to contact people privately. For years he continues with his silly teasing and hinting and pretending. Yet he never shows anything real that works. Whether Greorg is actually deluded by his own rhetoric or not is irrelevant, the end appears exactly the same - fraud. IMO, Georg should be dumped into the fraud forum where he belongs.

The future begins with throwing out the garbage. We need real solutions that actually work.