Chas Campbell Motor

[coylo]

First I consider this an assumption on your part. I have no idea of what you mean by; I am member of their private message posting club????

Ralph, that club does not exist! sheesh...It was a polite alternative to what I could of bluntly said; that is - I think you suck up to these people.... and it's not long before you wish to PM them for inside info and seek to be part of the story.
This is more than an assumption, it's my opinion, but may not be the opinion of others.

Yes I can spot the fraudsters, but I am patient about jumping in to soon until any benefit of doubt has left my gut feeling. I find that one must define ones personality traits before judging there actions.

Why what a good model citizen you are. I heard that line on a Miss Universe contest... next you'll be "wanting world peace".
Well...I hate everyone that comes along until they win me over! lol...Just kiddin'.
First impressions count with me, take Humbugger for example - thats how to make a good first impression. I enjoyed reading his informative posts, he'll be an asset to forum. Epi's posts however, never made any sense from day one... and it stuck in my mind then, that this fella's posts are going to be a waste of everyones time!
What's wrong with making a judgement call, or having an opinion....you can always change your mind.

In general, I don't have a problem with you Ralph, I just wish you'd be tough on fraud and idiots.
Your courtesy towards these scammers can be too over-bearing for me at times, you just can't remain everyones friend and sit on the fence!
However, I think you'd make a great diplomat, you remain calm under fire.

[rlortie]

Coylo,

You do of course have the right to voice your opinion. I do not feel that I suck up to anyone and I obviously am not the submissive type. Nor am I interested in being a part of any flock. I would rather graze my own
pastures.

My strategy for putting up with fraudsters is simple. I use the old western cowboy approach. "Give them enough rope and they will hang themselves" Sitting on the fence watching it happen is the traditional way of doing it. Some times a little help in belaying that rope is required but not often.

As for being a diplomat, no thank you, I have already been accused of talking like one. I did not except it as a kudo!

Ralph

[gogom]

Hi I'm George. Absolutly new here no background of the "matter" at all.
I have respect for all with good nature and genuine character. Everybody is unknown to me therefore equal despite the posts. The only thing i can contribute if i can say that is to ask questions, please?

Is it possible to combine different energy sources???????.............
a wind mill with the assistance of magnetic power and sun power?
A lot of people work out and everybody needs to to some extend.......Is it a good idea a machine generating energy from the efforts of the person trainning- running, lifting weights and so on?
Is a lightning's power obtainable? I saw about Tesla and the wireless transmission of hudge amouunts of energy?

Conspiracy?
Is it true that many inventors are treatened and/or killed or paid to abandon their work due to the invention? in particular spliting the WATER?
How real is that spliting of water?

Every body here knows the others and as far as I know combined knowledge is much more powerful than the individual knowledge not to mention that a small groop of people with the same opinions can have much larger success with the work and the $$$ needed.

Greed? If I'm onto something that "works" I do not thing greed will help me get rich. I would share it after all what is a person amongst billions of people. Unless there is a treat for my life.

Thanks to the people who are skeptical about the gravity wheel.... I thought about giving it a shot... and when I read that people have been researching for years and all the backgrounds...
I am not against it and trully wish somebody get it running!!!!!

Thank you for your efforts.... Exactly what you do is needed in this "new world order" and increasing death,suffering and controll over the people physicaly and psychologicaly.

[10x]

gogom

You see the problem with all the ideas and problems with such.

The idea of something that runs itself has through out history been used as scams.

I will not say such can or can not be done. Take the wheel for example. Folks for years have been trying to find solutions to it, were in reality the truth is questionable from the get go. In all feilds of so called free energy this problem exists.

One example of such a device that is modern is Finsrud kinetic magnetic art piece. As even he says it is not perpetual motion. It stops. But will give you an idea such could be done.

Such devices as the wheel may have been completed in the past. The problem I see with such is simply that the methods being looked at will not work. Bessler may have done such to simply hide his system.

It was stated that the wheel was simple. LOL that may be why it has not been replicated.

Good luck in your search.

[epistemologicide]

I am glad i dropped by to give you all some news.,

it seems i have seen who my friends are what a very interesting thread am slightly amused. Ralph your email needs updating and to be re sent to me, thought i added in your new one, here was your message

"Hi Ralph i am sorry for all the delays have been running around doing a few projects, now if you require testing or ANY informaiton on Chas let me know mean time check the panacea-bocaf.org page on him under registered technology for our findings and opinion of his system.

I can also ask him direct questions for you. We have gotten full disclosure for all and can you post it for my favorite annoying old farts [they understand] on BW for me, i dont want them to think i really want to help them, let them sleep at night lol-end

Fletcher, Gee whiz, i am slightly amused how accurate you all are (i am being sarcastic]

For people with genuine interests and whom have no personal stuff against myself i will honor what i sent to Ralph to ANY one , don't think i don't do this for a living. My 'privileged' back round allowed me to see Class subjugation and is why i have devoted my life to altruism, and helping others.

My Grammar is getting better, AND i can now swear in 4 different languages.

Your Humbugger has been banned on EVGRAY too. Do your own home work on this guy and tell me if he ever helps you or builds some thing, i will laugh and call you some thing which i am well known for.looks like this guy is worse then my EX stalking girlfriend, is he GAY?

It a shame Sevich isn't in Brisbane as he could mess around with Chas's wheel and report, . sevich, here is my new mobile number mate 0405 331825.

No i am not biased, but i do have a certain rapport with individuals like Chas, until i know for sure if fletcher would give away his PM design? or would Bill? MAYBE, i am not as sure, i know Chas would if perfected and working.So yes i respect him, but call a spade a spade and publish it.

If any one is building his design and doesn't want the private club annoying them then you may email me, i will continue to publish his results of his wheel and any improvements made [we are re building his whel BTW] for all whilst Scott lets me.

Good day gentle men and happy building.

Ps can some one email me if needed for ANY requests, i better not Frequent these threads only report results, i dont want to upset the private club *rolls eyes* and am still a bit pissed.

------------------------------------------------------------------------------

thinking out loud and wont elaborate on this: I am tempted to tell you all the real story of my back round but don't really care about my self, only helping those less fortunate then me.

[ovyyus]

Epi, you're such a rude clown. Why don't you find something productive to do with your previledged life - like run away with a circus. At least then all those "less fortunates" in the World would have something to look up to, and laugh at.

[coylo]

What's this?... Epi's back and I didn't get one volatile mention!

My Grammar is getting better, AND i can now swear in 4 different languages.

Wow, nice to hear that your obnoxious tongue can reach and enrich those the world over, what a culture vulture!

P.S...did someone with a bit of manners and class write that post for you?... It was more reserved than usual!

[racer270]

quote:
thinking out loud and wont elaborate on this: I am tempted to tell you all the real story of my back round but don't really care about my self, only helping those less fortunate then me.

end quote:
-------------------------------------------------------------------------------------
ha epi...
i am a HOLE lot less fortunate , then any one here...!

i am doing the big "D"....and i don't mean Dallas ..

i am in the middle of some tuff ass times right now...:(

how about some HELP...!!!!!

Gordy

[rlortie]

Epi-Ashtweth,

"Hi Ralph i am sorry for all the delays have been running around doing a few projects, now if you require testing or ANY informaiton on Chas let me know mean time check the panacea-bocaf.org page on him under registered technology for our findings and opinion of his system.

I followed your instructions above, all I found is a promotional item explaining Chas and in motor.


What I require:
Where are the results and explanation of the tests that were allegedly performed. All I have heard via another forum was that it did not perform as anticipated. On a third forum I read that the tests were not carried out as previously proposed.

True I am a skeptic but I also refrain from arguing and taking it to a personal level until substantiated facts are known. I am a skeptic of my own research and that is what gives me incetinve to keep trudging.

I could care less about your personal background. I have pen pals all over the globe. Issues of race, color, religion family background, education or handicapsshould have no bearing on panacea-bocaf.org or here.

I am interested in R& D and do not expect to receive any grants until the proof is in the pudding. Only two members of this forum have ever donated or assisted me. One ordered parts and had them shipped to my address. Another sent me the key part of his design for farther research.

Your Panacea pages throw out a lot of names, such as Bill Muller/Carmon Miller, Depalma Newman, Lindeman, Beardon, ETC. Some of these I know or knew personally and have had close contact with. I had many of phone conversations with Bill Muller before his Death and duplicated some of his work.

Bottom line is whether it be on over-unlity, JLN labs Evgray, Energy 2000 ETC. No one has proved to me that you will ever get more out of machine using copper wire coils including motors than you put in. Tom beardon as some here know is at the bottom of my list. IMO as anyone coming close My choice would be Butch Lafonte.

Ralph

[epistemologicide]

Epi, you're such a rude clown. Why don't you find something productive to do with your previledged life - like run away with a circus. At least then all those "less fortunates" in the World would have something to look up to, and laugh at.

Dont get excited i have more productive things to do then return here to give the bitchy 'gentlemen' club some reality checks.


Bill,

Become some thing first, before trying to offend me, then maybe i might not laugh at you old man.

I can say go back and read my aggressive posts to you, but this time i think ill just remind you, that if you don't build any thing, and don't do HALF the things i do involved in this field, not including BUILDING and going to universities, grant foundations and financing open sourced engineers

then you old man are a pinch of #### compared to me.

goto to the GYM too mate, your 'impressive lol' writing style and grammar still wont change the fact your an arm chair old fart who thinks you can call me a clown and not make me laugh at you.
I am part of non profit org,

take a look at this
http://www.panaceauniversity.org
http://www.panacea-bocaf.org

We also have 100's of registered engineers and have two open sourced energy devices we are revealing to faculties , and various conferences, plus also grant foundations in order to support open sourced engineers.

so mate get off your old fat behind and do some thing LOL
don't make me laugh mate, physically and mentally you do.

And i heard that the LITTLE boys club here pressured ralph saying he was 'wtih epi' GROW UP YOU DICKS, i mean you and your little politics gentlemen club is pathetic, its no wonder i don't have time or day for these threads any more.

Keep making friends gentle men, just remember who is doing stuff and who is an arm chair enthus, its not very funny quiet sad actually.

i wont elaborate on what i said here you can email me , i will be reporting results only from now on., i have more productive things to do then spend time with inactive bitter old men.

PS, that request wasn't emailed to me, ill over look that this time.

Ashtweth

[epistemologicide]

Thats more like it Ralph

Yes i understand all the hype and inactivity of such methods to publicly disseminate this technology, not to mention the political and economic conditions. Hence why our proposed granted research and development center is designed to alleviate this and make the claims and tech a reality.

If you want OU in my honest opinion build what two of our registered engineers have done and as a result encountered interference. We have built this we are putting into a laymen write up so more people around the world can replicate it.

DID YOU READ THAT MEN IN BLACK?
http://www.panacea-bocaf.org/Meyerswatercell.htm

Back on topic

http://video.google.com/videoplay?docid ... 6284&hl=en
Chas Gravity wheel plans

IMO his Motor fly wheel is not OU as is, we used watt hour meters so the tests were conclusive as far as we are concerned , but will do more tests as Stefan requested.

R and D document -- which we will be doing on his set up.

Fly wheel testing doc to apply to his set up, plans for his motor fly wheel are on our on line uni site
http://www.panacea-bocaf.org/files/Campbell1-5A.pdf

EDIT email me for more request or a response to this, im not ignoring you just dont wish to sort through pages of babble

[ovyyus]

Ep, I doubt you have much of an education (clearly you weren't paying attention in English class). I doubt you would be capable of building and testing anything more complicated than a paper aeroplane. I also doubt there is much that you say that can't be attributed to your own very apparent self-delusions of grandeur.

I don't doubt that people around you must wonder at your constant bumblings and outbursts. I don't doubt that you need help with mental stability issues (roidrage perhaps?). I don't doubt that people around you might pander to your childish needs and inflated ego. Isn't it lucky for you that most people are just too damn nice to actually tell you what they really think. That must be a privilege you are all too familiar with.

Any circus clown can gather a suitcase full of internet-based research - other people's work - and stitch together yet another useless frankenstein website of repeat info. IMO, we need every man working on deck, not off following some deluded fool who's peddling old garbage already well picked over and thrown out. The only thing worse than a useless parasite who does nothing but flap and squawk, is one who goes that step further and leads everyone around them down the proverbial garden path to never-never.

IMO, you are currently a waste of time mate. Why don't you work on that before inflicting yourself on the "less fortunate"? Funny how "non profit" sets it's overheads at about 90% of income. I'm sure yours aren't quite that high... then again, all that gym work... gotta stay pumped... those 'dietary' supps are expensive, right... ;)

[coylo]

To rework a famous quote...

Epi is "standing on the shoulders"... of deluders! (...and probably in a very thick fog)

Not a very stable platform!

[JohnnyD]

Epi,

Dont get excited i have more productive things to do then return here to give the bitchy 'gentlemen' club some reality checks.

But you did return here....

JohnnyD

[10x]

ROTFLMAO.
I had to go and read this thread. Nutz is all I can say.

Non productive thread it is.