Hi Alan,
Although we haven't spoken much since the days of Arrache, and not at all during my forced absence due to a brain infection, I certainly have an affinity with you as you overcome your physical disabilities.
Hopefully, once the VA undergoes a much needed overhaul under the new administration - Go Trump🇺🇸- you'll receive the physiotherapy post knee op. From this point I am certain you'll move forward in leaps and bounds as you address the calorie imbalance that comes with improved mobility. Plus any steroid reduction, taken to reduce joint swelling, will greatly assist with weight loss once you're more ambulant.
The key to survive hardship is to maintain a positive outlook and mental drive. This will to improve your circumstance does make a profound difference to recovery rate, so get angry at any negativity as it offers nothing. I have a sense though Alan that you have the inner resilience of ten men yer big lump.
So from one ex soldier to another, suck it up princess 😏
Chris
His Secret Is In The Levers
Moderator: scott
-
ChrisHarper
- Aficionado
- Posts: 401
- Joined: Thu Mar 10, 2016 1:01 pm
re: His Secret Is In The Levers
No demands are made of a person perceived to be an idiot- Perfect
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
re: His Secret Is In The Levers
Thanks Chris
The VA is paying for my operations of my knees to a private doctor due to 3 years of delays since my MRIs. They where having problems taking care due to lack of Doctors. Yet it also took both legs locking in the bent position at the emergency room to get the MRIs. BTW I do suck up the pain but I don't like it, but it is a fact of life. I still work despite. I just wish I had more wheel time in my shop. The armor is seeming all I can get done of late.
__________________________________
preoccupied
I don't drink any form of beer or harder alcohols, and I do drink a lot of water. There is no simple answer for weight loss depending on the conditions and holidays make it harder.
Builds are the final words for wheel designs, no mater what someone may think. Convincing ourselves is easy, but convincing others is hard.
The VA is paying for my operations of my knees to a private doctor due to 3 years of delays since my MRIs. They where having problems taking care due to lack of Doctors. Yet it also took both legs locking in the bent position at the emergency room to get the MRIs. BTW I do suck up the pain but I don't like it, but it is a fact of life. I still work despite. I just wish I had more wheel time in my shop. The armor is seeming all I can get done of late.
__________________________________
preoccupied
I don't drink any form of beer or harder alcohols, and I do drink a lot of water. There is no simple answer for weight loss depending on the conditions and holidays make it harder.
Builds are the final words for wheel designs, no mater what someone may think. Convincing ourselves is easy, but convincing others is hard.
"Our education can be the limitation to our imagination, and our dreams"
So With out a dream, there is no vision.
Old and future wheel videos
https://www.youtube.com/user/ABthehammer/videos
Alan
So With out a dream, there is no vision.
Old and future wheel videos
https://www.youtube.com/user/ABthehammer/videos
Alan
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
Chris,
His knee problem isn't service connected. The V.A. has plenty of doctors. He's been saying for years that their going to do it.
Might be why he calls me a fraud. After all, I did post recently that the V. A. is going to resolve my medical issues because the First Lady asked them too. If not for that, they wouldn't be helping me.
Jim
Edit
AB Hammer, that is clever or you. Last week you were on your way to 100% disability and now your knees are getting fixed.
At the same time you post your condition on perpetual motion.
You say developing an idea or working up a prototype proves nothing.
All you can say is how bad you have it and then how people should accept your standards.
The way you lie about your injuries then claim they are service connected shows you have no respect for Veterans who really do have service connected injuries that makes their lives difficult.
His knee problem isn't service connected. The V.A. has plenty of doctors. He's been saying for years that their going to do it.
Might be why he calls me a fraud. After all, I did post recently that the V. A. is going to resolve my medical issues because the First Lady asked them too. If not for that, they wouldn't be helping me.
Jim
Edit
AB Hammer, that is clever or you. Last week you were on your way to 100% disability and now your knees are getting fixed.
At the same time you post your condition on perpetual motion.
You say developing an idea or working up a prototype proves nothing.
All you can say is how bad you have it and then how people should accept your standards.
The way you lie about your injuries then claim they are service connected shows you have no respect for Veterans who really do have service connected injuries that makes their lives difficult.
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
re: His Secret Is In The Levers
@All,
This is the suggestion I gave to AB Hammer. He did say no so now if it's worth something, then I make me some money.
If it is enclosed so it can hold water, then it would simulate cross country skiing.
I think all AB Hammer wants to do is collect disability and post in here as an authoritive figure. You know, he gets to make the rules when if it's not his work he should let those who want work on something work rather than act like he's managing them.
As for the low impact design, once healthy, it will be an easy build when compared to Bessler's wheel.
This is the suggestion I gave to AB Hammer. He did say no so now if it's worth something, then I make me some money.
If it is enclosed so it can hold water, then it would simulate cross country skiing.
I think all AB Hammer wants to do is collect disability and post in here as an authoritive figure. You know, he gets to make the rules when if it's not his work he should let those who want work on something work rather than act like he's managing them.
As for the low impact design, once healthy, it will be an easy build when compared to Bessler's wheel.
- Attachments
-
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
@All,
It is my opinion that when I am successful that AB Hammer will claim he taught me. This is because over the last 10 years he Will show where I only posted with him. TOS requires me to be nice to him because its the internet. It doesn't matter if I want to work with other guys because it is his right to dominate me online.
He's a typical cyber bully in my opinion.
Probably why I'll stay offline. He's a failure in his own life which is the only reason I need to not want to work with him.
Jim
It is my opinion that when I am successful that AB Hammer will claim he taught me. This is because over the last 10 years he Will show where I only posted with him. TOS requires me to be nice to him because its the internet. It doesn't matter if I want to work with other guys because it is his right to dominate me online.
He's a typical cyber bully in my opinion.
Probably why I'll stay offline. He's a failure in his own life which is the only reason I need to not want to work with him.
Jim
-
ChrisHarper
- Aficionado
- Posts: 401
- Joined: Thu Mar 10, 2016 1:01 pm
re: His Secret Is In The Levers
Jim,
I think that, by definition, anyone who attempts PM research could be considered flawed by some, but on the flip side, the individual imaginative leaps of faith required, indicate to me laudable traits.
I personally never judge others based on the opinion of others, for to do so would give the impression that I give a shit!
Furthermore, if you worry about IP theft, just date and publish as wide as possible across many mediums, or keep quiet and lodge a patent.
I may publish shit designs , or not, but they are my shit designs 😂
Beyond that, any name calling or innuendo of wrongdoing is just a pissing contest.
I would rather people post designs, then we can collectively discuss its merits.
Chris
I think that, by definition, anyone who attempts PM research could be considered flawed by some, but on the flip side, the individual imaginative leaps of faith required, indicate to me laudable traits.
I personally never judge others based on the opinion of others, for to do so would give the impression that I give a shit!
Furthermore, if you worry about IP theft, just date and publish as wide as possible across many mediums, or keep quiet and lodge a patent.
I may publish shit designs , or not, but they are my shit designs 😂
Beyond that, any name calling or innuendo of wrongdoing is just a pissing contest.
I would rather people post designs, then we can collectively discuss its merits.
Chris
No demands are made of a person perceived to be an idiot- Perfect
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
Chris,
The reason I post work in here is an attempt to include other people in my work. As AB Hammer has said before, it's Bessler's wheel and anyone can build it.
Yet he refuses to let me work with other pe. Kind of why I don't like him. He's too controlling.
As for what I have been trying to get across in this thread is where accepted science states that weights can be reset using 25% of the energy they created.
Jim
The reason I post work in here is an attempt to include other people in my work. As AB Hammer has said before, it's Bessler's wheel and anyone can build it.
Yet he refuses to let me work with other pe. Kind of why I don't like him. He's too controlling.
As for what I have been trying to get across in this thread is where accepted science states that weights can be reset using 25% of the energy they created.
Jim
-
ChrisHarper
- Aficionado
- Posts: 401
- Joined: Thu Mar 10, 2016 1:01 pm
re: His Secret Is In The Levers
Jim,
I would certainly welcome a discussion with you under a new topic heading to discuss leverage perceptions, which, ultimately is all wheel design is about ( elevating a weight to create PE about a pivot point for less energy than the elevated mass creates.
There exists some flaws in the one dimensional approach to design, especially when treating the existing classes of levers as an absolute.
To succeed , you have to be able to effortlessly migrate any created mechanical advantage at 90 degrees to the planes the Lever Laws are valid.
This is a kind of planar theory whereby switching a local reference frame creates a change in state or PE. This dynamic energy feedback induces mechanical rotation as the balance scales seek equilibrium .
The Lever Laws are just and example of the arrogance of man as they sort to lineate and flatten Natures Laws to a page.
Chris.
I would certainly welcome a discussion with you under a new topic heading to discuss leverage perceptions, which, ultimately is all wheel design is about ( elevating a weight to create PE about a pivot point for less energy than the elevated mass creates.
There exists some flaws in the one dimensional approach to design, especially when treating the existing classes of levers as an absolute.
To succeed , you have to be able to effortlessly migrate any created mechanical advantage at 90 degrees to the planes the Lever Laws are valid.
This is a kind of planar theory whereby switching a local reference frame creates a change in state or PE. This dynamic energy feedback induces mechanical rotation as the balance scales seek equilibrium .
The Lever Laws are just and example of the arrogance of man as they sort to lineate and flatten Natures Laws to a page.
Chris.
No demands are made of a person perceived to be an idiot- Perfect
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
re: His Secret Is In The Levers
Chris,
We can try that. If you look back a few posts, you'll see where I said there were 2 rules that govern perpetual motion.
Rule #1 is you can't cheat the laws of physics.
Rule #2 is if you have any problems, refer to rule #1.
What this means is that if you don't understand physics then you might not know what it allows for. What many people over look is that there are 2 basic principles that govern our universe. The first is gravity and the 2nd is entropy.
They say entropy will cause our universe to expand until it ceases to exist in any recognizable form. The problem with this is that gravity states that all matter will become a single mass and collapse into itself.
The current Standard Model ignores gravity. Why I mention this is because with Bessler's wheel, increased momentum needs to be conserved by turning it inward. When this happens then the wheel will accelerate. The link is to a video that demonstrates how a moment of inertia can be conserved as increased angular momentum. And to understand Bessler's wheel, this is a must.
And if anyone ever watches figure skating, then they'd know that 10 year old kids understand this because the announcers will always discuss the physics behind it. https://www.youtube.com/watch?v=AQLtcEAG9v0
Jim
edited to add;
AB Hammer,
The guy in the picture with me is Congressman Andy Barr. He happens to like me and when I met him at a meeting of his 6th District Veteran's Committee of which I am a part of, I explained to him that scientists don't understand that co2 allows for ozone to occur.
I may have the chance to demonstrate it and if I am right, I'd be helping thousands of families because eastern Ky. is hurting because people think co2 is causing warming. And in that aspect, for what I am pursuing, I am supporting the work of Svante Arrhenius who is the Father of modern Climate Change and also the work of Joules and Thompson.
And if this happens, then since I live in Ky., I'd probably get the kind of treatment my niece is singing about in her video. She did win the Best Christian Video of the Year award with it. And that's why Bessler's wheel is a hobby for me and will get me more involved with wood working as time goes by.
https://www.youtube.com/watch?v=xyx23eDQAhk
And for anyone interested, some of what I learned serving on the U.S.S. Kitty Hawk is what has helped me to consider Atmosphere Chemistry a little different than what is accepted. And I did get exposed to a lot of things in the Navy. Any where from sea water desalination to some of water's unique characteristics to what it takes to launch a jet off the ship. They use 1,200 psi of steam to launch them.
https://www.youtube.com/watch?v=psa7NJyfSjM
if things work out, I'll need to get a better picture of me standing next to Congressman Barr. You know, maybe he'll be smiling then ?
We can try that. If you look back a few posts, you'll see where I said there were 2 rules that govern perpetual motion.
Rule #1 is you can't cheat the laws of physics.
Rule #2 is if you have any problems, refer to rule #1.
What this means is that if you don't understand physics then you might not know what it allows for. What many people over look is that there are 2 basic principles that govern our universe. The first is gravity and the 2nd is entropy.
They say entropy will cause our universe to expand until it ceases to exist in any recognizable form. The problem with this is that gravity states that all matter will become a single mass and collapse into itself.
The current Standard Model ignores gravity. Why I mention this is because with Bessler's wheel, increased momentum needs to be conserved by turning it inward. When this happens then the wheel will accelerate. The link is to a video that demonstrates how a moment of inertia can be conserved as increased angular momentum. And to understand Bessler's wheel, this is a must.
And if anyone ever watches figure skating, then they'd know that 10 year old kids understand this because the announcers will always discuss the physics behind it. https://www.youtube.com/watch?v=AQLtcEAG9v0
Jim
edited to add;
AB Hammer,
The guy in the picture with me is Congressman Andy Barr. He happens to like me and when I met him at a meeting of his 6th District Veteran's Committee of which I am a part of, I explained to him that scientists don't understand that co2 allows for ozone to occur.
I may have the chance to demonstrate it and if I am right, I'd be helping thousands of families because eastern Ky. is hurting because people think co2 is causing warming. And in that aspect, for what I am pursuing, I am supporting the work of Svante Arrhenius who is the Father of modern Climate Change and also the work of Joules and Thompson.
And if this happens, then since I live in Ky., I'd probably get the kind of treatment my niece is singing about in her video. She did win the Best Christian Video of the Year award with it. And that's why Bessler's wheel is a hobby for me and will get me more involved with wood working as time goes by.
https://www.youtube.com/watch?v=xyx23eDQAhk
And for anyone interested, some of what I learned serving on the U.S.S. Kitty Hawk is what has helped me to consider Atmosphere Chemistry a little different than what is accepted. And I did get exposed to a lot of things in the Navy. Any where from sea water desalination to some of water's unique characteristics to what it takes to launch a jet off the ship. They use 1,200 psi of steam to launch them.
https://www.youtube.com/watch?v=psa7NJyfSjM
if things work out, I'll need to get a better picture of me standing next to Congressman Barr. You know, maybe he'll be smiling then ?
- Attachments
-
-
ChrisHarper
- Aficionado
- Posts: 401
- Joined: Thu Mar 10, 2016 1:01 pm
re: His Secret Is In The Levers
Jim,
Out of curiosity, why do you say:-
PostPosted: Sat Nov 26, 2016 2:53 pm Post subject: Reply with quote Report Post to Admin
Chris,
The reason I post work in here is an attempt to include other people in my work. As AB Hammer has said before, it's Bessler's wheel and anyone can build it.
Yet he refuses to let me work with other people'.
Who are 'other people' in the context of the sphere of influence on this forum?
To be blunt, surely you'll just do what the hell you want.!
Anyway, as I bore easy, and have zero tolerance for personal politics, I'll get back on the highway, and go where I need to go.
Kind Regards, Chris
Out of curiosity, why do you say:-
PostPosted: Sat Nov 26, 2016 2:53 pm Post subject: Reply with quote Report Post to Admin
Chris,
The reason I post work in here is an attempt to include other people in my work. As AB Hammer has said before, it's Bessler's wheel and anyone can build it.
Yet he refuses to let me work with other people'.
Who are 'other people' in the context of the sphere of influence on this forum?
To be blunt, surely you'll just do what the hell you want.!
Anyway, as I bore easy, and have zero tolerance for personal politics, I'll get back on the highway, and go where I need to go.
Kind Regards, Chris
No demands are made of a person perceived to be an idiot- Perfect
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
Chris,
What politics ? When AB Hammer posts that he doesn't want money, an invention or Bessler's wheel, all that's left is me.
I'm not gay. I had a neighbor I used to give a ride to work, one day he found himself walking home from the freeway.
What AB Hammer is doing is no different. I'd say he wants me to notice him. After all, he did post that if he doesn't like me personally then I don't have anything.
Jim
What politics ? When AB Hammer posts that he doesn't want money, an invention or Bessler's wheel, all that's left is me.
I'm not gay. I had a neighbor I used to give a ride to work, one day he found himself walking home from the freeway.
What AB Hammer is doing is no different. I'd say he wants me to notice him. After all, he did post that if he doesn't like me personally then I don't have anything.
Jim
WTF!! A total delusion.james.lindgard wrote:Chris,
What politics ? When AB Hammer posts that he doesn't want money, an invention or Bessler's wheel, all that's left is me.
I'm not gay. I had a neighbor I used to give a ride to work, one day he found himself walking home from the freeway.
What AB Hammer is doing is no different. I'd say he wants me to notice him. After all, he did post that if he doesn't like me personally then I don't have anything.
Jim
So I don't want money ??? LOL but I will only take mine honestly.
So I don't want an invention ??? Not one that belongs to someone else, I will build my own.
So I don't want Bessler's Wheel ??? What I want is my own running wheel that may be what Bessler did or it may not be what Bessler did, by design. No one knows or the story is already over.
Get your own life Lindgaard, I just want you to stop telling lies about me or what I was suppose to have said that you can't prove, for it is pure fiction.
The only honest thing you have said about me is (I don't like you) For I don't like having to defend myself of your false stories about me.
"Our education can be the limitation to our imagination, and our dreams"
So With out a dream, there is no vision.
Old and future wheel videos
https://www.youtube.com/user/ABthehammer/videos
Alan
So With out a dream, there is no vision.
Old and future wheel videos
https://www.youtube.com/user/ABthehammer/videos
Alan
-
ChrisHarper
- Aficionado
- Posts: 401
- Joined: Thu Mar 10, 2016 1:01 pm
re: His Secret Is In The Levers
Jim ,
I have no clue what you're talking about mate. Is this candid camera ?😂
Anyway, post a design if you have one as I do, and let others ask questions surely.
Chris
I have no clue what you're talking about mate. Is this candid camera ?😂
Anyway, post a design if you have one as I do, and let others ask questions surely.
Chris
No demands are made of a person perceived to be an idiot- Perfect
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
My Channel https://www.youtube.com/channel/UCrRGwI ... pIkj-YdiNQ
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
Chris,
I already have it figured out. I'll just have to stay offline. The TOS of any forum will support AB Hammer.
This means if I want to discuss Conservation of Momentum and he wants to talk about himself, he wins. I have to be nice to him. I have asked Scott to create a builder section but he won't do it.
This means people with no mechanical ability can take over my thread even though they'll refuse to stay on topic.
I'll have my surgery soon enough. Until then I should be taking it easy. Walking somewhere so I can post online aggravates my problem. Hope you have a God Jul!
I already have it figured out. I'll just have to stay offline. The TOS of any forum will support AB Hammer.
This means if I want to discuss Conservation of Momentum and he wants to talk about himself, he wins. I have to be nice to him. I have asked Scott to create a builder section but he won't do it.
This means people with no mechanical ability can take over my thread even though they'll refuse to stay on topic.
I'll have my surgery soon enough. Until then I should be taking it easy. Walking somewhere so I can post online aggravates my problem. Hope you have a God Jul!
-
james.lindgard
- Aficionado
- Posts: 516
- Joined: Sat Feb 13, 2016 8:38 pm
@All,
When I get ready to build which will probably be in January then Scott can make that decision on whether or not he wants to add a builders section to this forum. AB Hammer is an excellent example of why one is needed. All he does is disrupt my threads because he can say Jim is not being nice to me and the TOS states that he does have to be nice to me.
And in a builder section, AB Hammer could be blocked because that builder would have the right to exclude him from that thread.
Jim
When I get ready to build which will probably be in January then Scott can make that decision on whether or not he wants to add a builders section to this forum. AB Hammer is an excellent example of why one is needed. All he does is disrupt my threads because he can say Jim is not being nice to me and the TOS states that he does have to be nice to me.
And in a builder section, AB Hammer could be blocked because that builder would have the right to exclude him from that thread.
Jim