Good example here is why Westinghouse pulled the plug on Tesla.
Ralph
It Would Be More Noble To Clear J. Bessler's Name, than trying to solely profit
Moderator: scott
re: It Would Be More Noble To Clear J. Bessler's Name, than
What are you saying Ralph, Westinghouse never pulled the plug on Tesla.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
http://www.patentcafe.com/
A good site for licensing, intellectual property, etc.
Pendulums will not make your wheels go.......
A good site for licensing, intellectual property, etc.
Pendulums will not make your wheels go.......
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
http://www.uspto.gov/go/classification/ ... efs415.htm
Class 415, subclass 916 for Perpetual Motion Devices.
All the way at the end....
PERPETUAL MOTION DEVICES:
Rotary pump* or motor* device which claims to operate in a closed environment without a sustaining energy source.
Class 415, subclass 916 for Perpetual Motion Devices.
All the way at the end....
PERPETUAL MOTION DEVICES:
Rotary pump* or motor* device which claims to operate in a closed environment without a sustaining energy source.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
The parts I was waiting for arrived today. Have assembled those to the wheel.
Now have to arc weld quite a few hex nuts to the ends of threaded rods.
Each weight has 10 metal parts assigned to it.
Now have to arc weld quite a few hex nuts to the ends of threaded rods.
Each weight has 10 metal parts assigned to it.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
The parts I was waiting for arrived today. Have assembled those to the wheel.
Now have to arc weld quite a few hex nuts to the ends of threaded rods.
Each weight has 18 metal parts assigned to it.
I'm posting a few details in the spirit of fabrication.....
Now have to arc weld quite a few hex nuts to the ends of threaded rods.
Each weight has 18 metal parts assigned to it.
I'm posting a few details in the spirit of fabrication.....
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Have got my wheel about 70% assembled.
Discovered a conflict on the perimeter where parts couldn't move, but figured another way to hold the inner rim out from the faceplate so they don't hit any more.
When I drive to town, everything about the sights along the way look different, there and every where else. And those people sitting over there....they haven't a clue what is it I'm up too, and if they did, wouldn't come close to a solution if they tried at all.
Ahhhhhhhhh.........................
Discovered a conflict on the perimeter where parts couldn't move, but figured another way to hold the inner rim out from the faceplate so they don't hit any more.
When I drive to town, everything about the sights along the way look different, there and every where else. And those people sitting over there....they haven't a clue what is it I'm up too, and if they did, wouldn't come close to a solution if they tried at all.
Ahhhhhhhhh.........................
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Robert
I know the feeling.
You may want to use slight angle of attack
I know the feeling.
You may want to use slight angle of attack
JB Wheeler
it exists I think I found it.
it exists I think I found it.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Wheel:
Thanks, I'll try that...
BTW, how do you like my Besslerspeak?
Just practicing.
The American Indian had great fear and respect for "eccentricties".
The spirits ran their PMMs.
The Africans stole the chickens and goats from inside theirs...
Again, just practicing.
Had to order some 3 x 6 u-bolts from the local co-op, so am waiting on those.
Thanks, I'll try that...
BTW, how do you like my Besslerspeak?
Just practicing.
The American Indian had great fear and respect for "eccentricties".
The spirits ran their PMMs.
The Africans stole the chickens and goats from inside theirs...
Again, just practicing.
Had to order some 3 x 6 u-bolts from the local co-op, so am waiting on those.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Robert
The pendulum seems to want front stage lately.
Can you explain anything about the pendulum weight system on
the Topic (Weight question)
It looks good, but I still think its just the pendulum with attachments
The pendulum seems to want front stage lately.
Can you explain anything about the pendulum weight system on
the Topic (Weight question)
It looks good, but I still think its just the pendulum with attachments
JB Wheeler
it exists I think I found it.
it exists I think I found it.
re: It Would Be More Noble To Clear J. Bessler's Name, than
Wheel,
Sorry, I can't.
If I did comment on that subject, it would only be to keep the title of this thread at the top of the list...
J.E.E.B's improved rep. is one of my objectives you know...
Sorry, I can't.
If I did comment on that subject, it would only be to keep the title of this thread at the top of the list...
J.E.E.B's improved rep. is one of my objectives you know...
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.
re: It Would Be More Noble To Clear J. Bessler's Name, than
I understand, I think.
Do you mean you can not visit that topic, and comment on it there?
Or that you can not let that topic be part of this one?
Do you mean you can not visit that topic, and comment on it there?
Or that you can not let that topic be part of this one?
JB Wheeler
it exists I think I found it.
it exists I think I found it.
re: It Would Be More Noble To Clear J. Bessler's Name, than
my wheel is producing five lbs and two oz of overbalance
Weights are free to move this time. The levers which move them aren't connected yet.
Will post a picture of a sort of pendulum wheel that I mentioned earlier, had failed, Wheeler. I learned a lot from that one.
Weights are free to move this time. The levers which move them aren't connected yet.
Will post a picture of a sort of pendulum wheel that I mentioned earlier, had failed, Wheeler. I learned a lot from that one.
Robert (The Carpenter's Boy)
There's never time to do it right the first time, but there's always time to do it over again.
There's never time to do it right the first time, but there's always time to do it over again.