Are there any working wheels out there?

[ribby55]

I see a lot of talk but not many results. A lot theorists and a lot of ideas but I have yet to see someone with video of a working gravity wheel. Do you know why? Because if there was a working wheel the world would know about it.

It is so simple that if you knew you would understand and be able to build it.

I have two videos that I posted and my design match with Bessler's clues. I show it partially not to give away all my secrets. But it can be done.

My only beginnings are the simulations that I have posted. There will be a working model at the right time....

See my previous posts for the you tube link.

R.

[triplock]

It seems to me Ribby55 that you're getting a little frustrated that people aren't falling at your feet after you posted a simulation of a 'working' wheel.

This is because, due to the lack of design information, no one will be able to add comment or suggestion. At the end of the day, all that can be seen is a rotating disc :-(

As was said in my pm to you, the world is full of simulations that perport to show ou, but that doesn't count for anything. What I also pointed out in that email was that Algodoo is riddled with bugs, and for your one working simulation bearing a load, I have 15 !!!!


My strong recommendation is that you contact Ralph at Arrache or a similar organisation who will appraise you concept and report back honestly, and if the consensus is to build a prototype, then one would be built.

Other than that, your youtube clips are a waste of time.

The above opinion is not meant to be harsh Ribby, just honest based on my own experiences.

Good luck anyway,

Chris

[ribby55]

So you are saying that you have many working simulations but they do not operate in reality the same way? Then there must be something wrong. The reason I use simulation software is because it allows me to build something quickly and without materials. I have run tests with my simulation theory and in real life it responds exactly the same as the simulation.

My gravity wheel is one of three different free energy motors that I have invented. Once I get my other two working, because I cannot do a simulation because they are based on magnetism, I will build the third gravity based motor. Unless I can get assistance to build the gravity motor. It will be my third build.

If you knew what I know you would want to push to get this out there. It is for me the betterment of mankind.

[Richard]

hello ribby55

understand your excitment and frustration...it is however your strong conflicting emotions that cause you to to make such bold claims as you set yourself somehow apart from the rest of us.

I agree the wheel design is simple ( in principle) The axle is extraodinary however...six axle face plates clutched with four springs dual choc arrangements to allow bidirectional travel while allowing compressive elastic potential in one direction and choc blocking in the opposite direction and all this in duality...(both side/ends of storksbill(s) assembly..

Add to this a pendula counter weighted ramp(s) assembly that does not frictionally burst into flames after days and weeks of running....( neccessary for a Bessler wheel) not a gravity wheel.

A carpenters child might build it...but most certainly IMO could not have concieved it.

you show me your axle.....I'll show you mine!

I am here to share in a group effort to build Johann Earnst Elias Bessler(s) Wheel....not a Gravity wheel....there will be plenty of those to come.

It would be super to have you onboard with this....when we start perpetuating slips and falls the entire world will be our oyster....there is enough for all of us to gain something of value...lets work together to change the face of energy....I worry about the world my little granddaughter is going to grow up in....she is so precious to myself and Bonnie my wife..

richard

[triplock]

Look Ribby, the easiest person to fool is yourself, and I mean that in the sense that without third party validation or opinion, a concept is just that, no more.

My strong recommendation to you is that you take that leap of faith, step up to the plate and show your ideas to someone. That 'someone', in the context of this forum is Ralph at 'Arrache' who will build to your wheel design if it is felt that it has 'legs'.

Alternatively, if you wish to have a private discussion in confidence 'off forum' with me, then you are more than welcome to.

The above suggestions are really the only kind of backing you'd receive at this stage. A word of advice though; people tend to be very sceptical of someone who proclaims to have 'three working devices'. Either your a genius or a nutcase ;-)). So take a deep breath, calm down and stand back from the situation. Then decide what you want to do. It's obvious what you should do

Kindest regards,

Chris


EDIT: Sorry, three 'inventions'......

[ribby55]

One day the world will see my genius.

It didn't come to me without a lot of hard work and sleepless nights. My goal is create a better world for our next generation.

One day oil will run out and then what? We will go to war and kill each other for resources? When two countries got war there are no winners, everyone suffers. Even if the electric car were to be the norm then the coal burning electrical supply companies would have to work harder to produce even electrical power creating more pollution. An easy, cheap way of producing electric power is the answer. Gravity is one solution. Magnets are another. One day Man will plug his machines into the very wheel work of what drives the universe itself.

R.

[Richard]

ribby55

I personally know well the sleepless nights and the hard work you speak of

Remember friend...you could not compare your design to Statements made by Bessler if it were not for people like John Collins...who worked longer and harder than both of us together...

When you compare your design to Michenin Tractate you should be very appreciative of the enormous efforts of Stewert who would not allow just any old german translation to accompany these drawings...and thereby leading us down dead end paths...

Chris has given some good, insightful avenues for you to follow...please consider them...

richard

[ribby55]

I am looking for a team. I figured that this would be a good place to start. Trust me people my intentions are nothing but good. If my ideas come to fruition it will benefit everyone. The time has come that mankind will be able to tap into the free energy that is all around us.

My claims are not to take advantage of anyone. I am not a scammer. I despise them!

When I state something it is not to waste my breath. I am a person who believes in the truth. My claims are real and given to the time I will follow my path.

Our time has come!

[triplock]

Look Ribby,

I'll risk my place in your 'inner circle' by giving you the facts.

1. First of all you sound like an Evangelist, which is bloody annoying.

2. Secondly, 'genius' is a label only others can bestow.

3. Thirdly, get a small band of disciples together, possibly 12, and just build the FUGKING Thing, then you can turn water into FUGKING wine....

4. Lastly, I would love to be a part of your team ;-)))))

5. Go back to 1.


Chris

[Richard]

Chris....your a genius...see number two of your list!

ribby55...I am going to give you the benefit of a doubt...kinda like this

you've been up eleventyteen hours...staring at the monitor...half asleep drifting between conciousness and the twighlight zone enjoying unproved success of your design while at the same time formulating your nobel peace prize speech whilst trying to keep your calender open for Jay Leno, Oprah and such others

If this is not the case...and you really do appear to be preaching down your nose to us...then I would remind you of this

the greatest judgment is to those who say "racca" to their brothers...in otherwords....those who preach down there nose

Lighten up man...damn...again Chris suggested Ralph at "Arrache" ...do it relax...the world does not need saving...humanity will be forced to change that will happen

richard

[triplock]

Quote: Chris....your a genius...see number two of your list!

LOL. I've licked the stamp and posted a green dot to you for that Richard ;-)))

Chris

[triplock]

You are now 'acknowledge'. please collect the key to the executive crapper Rich....

Chris

[Richard]

Holy crap Chris...this is way to cool Ive figured this all out now

Scott is a genius
John is a Genius
Stewert is a Genius Ralph is a genius Steve, is a Genius, Nic is a Genius Path is a Genius geniusGeniusGeniusGENiuses

Nah! groveling just aint me....Thanks Chris your a Trip(lok):))

[nicbordeaux]

Nic is a Genius

That's it, I'm suing for libel.

[DrWhat]

ribby55, I agree with the others, Arrache is the way to go.