How Difficult can it be?

Miscellaneous news and views...

Moderator: scott

Post Reply
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

Tarsier79 wrote: Wed Nov 03, 2021 7:26 pm George, no I understood it perfectly. The spring holds the weight up, the weights apply no rotational force to the rims.

Agor, agreed. That is what I saw too.
In the vproject the weight is rolling up the hoop due to the magnet.
This cased by the spring and when it starts to drop down again the weight
exerts friction on the rim as in weight's rotation slows down.

Of cause when the weight rolls up the rim again there is this rotation increase; A counter effect.

That can be removed onto a curve inner ramp. Which is part of the stand.

Anyway this is Georg's line of investigation.
[MP] Mobiles that perpetuate - external energy allowed
Georg Künstler
Devotee
Devotee
Posts: 1718
Joined: Fri Nov 07, 2003 12:22 pm
Location: Speyer, Germany
Contact:

Re: How Difficult can it be?

Post by Georg Künstler »

what you don't see is, even it is being showed in the sketch is, that the big rings have no middle axle.
The big rings have the possibility to oscillating left and right.
The rolling cylinder have the possibility to swing left and right and also up and down, and the reversal.
It is totally different to vproject.
Best regards

Georg
User avatar
Tarsier79
Addict
Addict
Posts: 5014
Joined: Fri Mar 12, 2010 2:17 am
Location: Qld, Australia

Re: How Difficult can it be?

Post by Tarsier79 »

And yet it operates, or doesn't, on the exact same principle.
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

Tarsier79 wrote: Wed Nov 10, 2021 9:34 am And yet it operates, or doesn't, on the exact same principle.
I do believe we have a consensus of two!

I did take the liberty to supplement vproject's device with a inner curved ramp. That was done so the increase in rotation of the weight's at the bottom would not create counter torque on the wheel.

As the pull from the magnet/spring would cause the weight to rise up onto the wheel with a new rotational energy.

Note. The weight's could be double cone like to improve on the effect.

The rotation will be imparted to the wheel and the weight will drop again; and on we go.

Regards
Last edited by agor95 on Wed Nov 10, 2021 11:24 am, edited 1 time in total.
[MP] Mobiles that perpetuate - external energy allowed
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

On another 'How difficult can it be?' sub-question.

Looking at the forces of inertia in the 'Marquis Wheel' demo.
I look at it and say 'hold-on it's resisting being rotated all the time!'.

But flywheels only resist during spinning up or down.

So the answer is centripetal force is cancelling the inertia forces.

Well that is OK then.

But it's not right?

You combine the two resistive inertia forces and see were the counter force is pointing. It's not towards the centre of rotation?

P.S. Some extra coding was required. I will let you figure it out the why.
Last edited by agor95 on Wed Nov 10, 2021 1:27 pm, edited 3 times in total.
[MP] Mobiles that perpetuate - external energy allowed
rasselasss
Aficionado
Aficionado
Posts: 918
Joined: Tue Jan 31, 2012 7:19 pm
Location: northern ireland

Re: How Difficult can it be?

Post by rasselasss »

I have always been intrigued by Einstein and Tesla their involvement in "The Philadelphia Experiment"....and always wonder would the truth ever come to light...nothing to do do with our subject matter ,i've read all the different theories and explanations but none of them convince me...
Rasselas busied himself so intensely in visionary bustle he forgot his solitude
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

Hi rasselasss

The truth is out there. Also the lies for irradiating service men with electromagnetic power resulting in splitting sea water into a hazy fog.
What about the water within the service men? The ships metal would become soft and pliable. You could sink into the deck.

So what do we have? The deaths and permanent harm of people because of a really badly executed project.

Have you the names of the people responsible for this tragedy or are you following the cover story that hides them?

All the best
[MP] Mobiles that perpetuate - external energy allowed
rasselasss
Aficionado
Aficionado
Posts: 918
Joined: Tue Jan 31, 2012 7:19 pm
Location: northern ireland

Re: How Difficult can it be?

Post by rasselasss »

Rasselas busied himself so intensely in visionary bustle he forgot his solitude
rasselasss
Aficionado
Aficionado
Posts: 918
Joined: Tue Jan 31, 2012 7:19 pm
Location: northern ireland

Re: How Difficult can it be?

Post by rasselasss »

I could find no record of any comments made on this matter by any of the crew members who served on uss eldridge which surprised me because of its infamy...i have read(if we can believe anything only eye witness statements)...that the scientists went on to the Manhattan project..also Tesla after his death(and Einstein)their papers were removed by the FBI ...i believe only eye witness accounts..thus the truth may be out there but difficult to find..
Rasselas busied himself so intensely in visionary bustle he forgot his solitude
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

Well there is always the ship's roster.

I expect some specialist are not on the roster. However the servicemen would have been used as test subjects.

Like they have been used so many time before and after.

Good luck
[MP] Mobiles that perpetuate - external energy allowed
Art
Devotee
Devotee
Posts: 1023
Joined: Wed Sep 23, 2009 12:55 pm
Location: Australia

Re: How Difficult can it be?

Post by Art »

Brings to mind my fathers comment about the armed services after his experience in the British Navy during WW 2 .

Quote :- " I wouldn't put my dog in it "

and

" NEVER volunteer for anything ! "

! : )
Have had the solution to Bessler's Wheel approximately monthly for over 30 years ! But next month is "The One" !
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

It reminds be of leaders who declare themselves responsible or chain of command who are responsible for their servicemen are never made responsible for criminal negligence or crimes against humanity against there own.

Pensioned off maybe but for a crimes nope.
[MP] Mobiles that perpetuate - external energy allowed
rasselasss
Aficionado
Aficionado
Posts: 918
Joined: Tue Jan 31, 2012 7:19 pm
Location: northern ireland

Re: How Difficult can it be?

Post by rasselasss »

Rasselas busied himself so intensely in visionary bustle he forgot his solitude
rasselasss
Aficionado
Aficionado
Posts: 918
Joined: Tue Jan 31, 2012 7:19 pm
Location: northern ireland

Re: How Difficult can it be?

Post by rasselasss »

Continuing on this theme,i found this interesting, may be of interest to some...
Rasselas busied himself so intensely in visionary bustle he forgot his solitude
User avatar
agor95
Addict
Addict
Posts: 7581
Joined: Wed Sep 24, 2008 8:09 pm
Location: Earth Orbit
Contact:

Re: How Difficult can it be?

Post by agor95 »

There is me thinking covid-19 had got him.

So will his legacy be lost when his time comes?
Last edited by agor95 on Mon Jul 04, 2022 12:44 pm, edited 1 time in total.
[MP] Mobiles that perpetuate - external energy allowed
Post Reply