Re: Some Material


[ Follow Ups ] [ Post Followup ] [ Bessler Discussion Board ] [ FAQ ] [ Back to BesslerWheel.com ]

Posted by Vecto Viper (205.162.15.2) on July 11, 2003 at 01:33:45:

In Reply to: Re: Some Material posted by Scott Ellis on July 10, 2003 at 21:36:32:

: Here is a picture that Michael sent me. Thanks Michael and good luck!

:
:


: : I am uploading a photo that shows approx. 1/3 of the parts, to Scott today. It won't reveil how anything works however. Just to let you know, most-not all but most of the parts are fabricated from oak. I'll be spending today and tomorrow assembling a section of this machine to make sure all the parts align properly, and then going from there. Time is somewhat delayed from what I had wanted, but then life intercedes, and as anyone who has built something will tell you, things take time. I'm also doing all of this out of a small one bedroom apartement.

Try not to wake the neighbours, OK? :*)
Seriously, those are some nicely machined parts there...

Viper


: : Best regards,

: : Michael




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Comments:
Optional Link URL:
(Archived Message)


[ Follow Ups ] [ Post Followup ] [ Bessler Discussion Board ] [ FAQ ] [ Back to BesslerWheel.com ]