Need Information

[ Follow Ups ] [ Post Followup ] [ Bessler Discussion Board ] [ FAQ ] [ Back to BesslerWheel.com ]

Posted by Ernest (64.213.224.94) on October 12, 2003 at 11:26:20:

I need advice and/or information on obtaining the right material to fabricate a wheel approximately 3 feet diameter.The material should be flat and maintain structural stability within 1/8" deviation on the perimeter and lightweight.
Thickness is not a big concern as long as weight is kept to a minimum. Solid or composite material can be used.
Thanks,
Ernest

Follow Ups:

Re: Need Information Patrick 11:53:36 10/12/03 (1)
- Re: Need Information Michael 13:08:37 10/12/03 (0)

Post a Followup

Name:
E-Mail:
Subject:
Comments:	: I need advice and/or information on obtaining the right material to fabricate a wheel approximately 3 feet diameter.The material should be flat and maintain structural stability within 1/8" deviation on the perimeter and lightweight. : Thickness is not a big concern as long as weight is kept to a minimum. Solid or composite material can be used. : Thanks, : Ernest
Optional Link URL:
(Archived Message)